|
I don't think you will find setting that others have made that need to be reset. there is not much in the way of user setting on the AW machines. There are some useful toggles on the preferences/utility page, but you do not need the CD disc to access those items. As with all these machines it is necessary to utilize the Initial Setting preset on the Scenes page, in order to set the machine to a known starting point. Again, no CD needed. As Mac says there are some button pushing sequences to do such procedures as calibrating the faders. You may want to reformat the HD. that can be done without the CD too.. Robbie would be proud of you if you learn how to do that..
Here is a big tip that i do not believe is covered in the manual. I heard about it while using another piece of gear, not from Yamaha, but decided to try it on the 2400. It involves the two buttons above the jog wheel labeled - (decrease) and + (increase). When you want to change a setting such as a pan or aux send or frequency #, you can do it by using the cursor to choose the field and adjusting via the jog wheel or alternately by pressing the + or - button. What the manual DOES tell you, and is obvious, is that, if you press the + button and hold it down, then the target number cycles up. But what the manual DOES NOT say is that - - - While you are doing that advancement, press (and hold) the - button and the rate of increase is greatly accelerated. Works in the opposite way too. This is a BIG time saver and also will decrease use and wear of the jog wheel..
_________________
Byron
|
Login
FAQ
Search
