The DijonStock Digital Home Recording Support Forum

*** USER REGISTRATION DISABLED! FOR ACCESS TO THE BOARD, MAIL TO registration AT dijonstock DOT com. THANK YOU ***
It is currently Tue Nov 21, 2017 3:33 pm

All times are UTC + 1 hour [ DST ]




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: Altering sounds via Midi
PostPosted: Fri Mar 23, 2007 6:41 am 
Offline
Mr. Electonica Dude
User avatar

Joined: Wed Jul 14, 2004 1:48 am
Posts: 11452
Location: Godly Taxas
Favourite food: Frog Legs
Machine type: AW4416
On a synth (or your G recorder) the wheels , knobs , switches , pedals, etc. are all used to alter the sounds you are playing. A pitchwheel bends a note. A sustain pedal holds the note until released. There is no secret around here what a volume pedal does.

This brings us to another group of midi messages called control change messages. There are a total of 120 controllers and each one has it's own message.

A pitchbend wheel varies the pitch of the instrument's note (or notes) being played either up or down. The smooth event is great for imitating guitars , pedal steels , some horns , etc. Usually they are center detented.(no effect in the center detent) Yes there is a universal Midi message for pitch wheels called "pitchbend change" . It has a value of 0 to 127 and number 64 is the center detent. numbers below 64 lower the pitch , numbers above raise it.

A modulation wheel is found on most synths and can be assigned various duties from changing filter sweeps to changing the speed of a Leslie horn . A mod wheel is controller number 1.

A volume knob , pedal or slider is controller #7. it also has 128 steps from full off to peak volume.

Controller #10 is the Pan control. 64 is center , 0 to 64 is left and 64 to 127 is full right.

The sustain pedal (damper pedal) holds the note even as the key is released. It's number is controller 64. It is different in that values of 0 to 63 are "off" and values of 64 to 127 are "on".

The table below presents a summary of the MIDI Standard Controller codes in decimal and hexadecimal (h) form.
Decimal Hex Controller Name
0 00h Bank Select (Controller # 32 more commonly used)
1 01h Modulation Wheel
2 02h Breath Contoller
3 03h Undefined
4 04h Foot Controller
5 05h Portamento Time
6 06h Data Entry MSB
7 07h Main Volume
8 08h Balance
9 09h Undefined
10 0Ah Pan
11 0Bh 0Ch
12 0Ch Effect Control 1
13 0Dh Effect Control 2
14-15 0E-0Fh Undefined
16-19 10-13h General Purpose Controllers (Nos. 1-4)
20-31 14-1Fh Undefined
32-63 20-3Fh LSB for Controllers 0-31 (rarely implemented)
64 40h Damper Pedal (Sustain) [Data Byte of 0-63=0ff, 64-127=On]
65 41h Portamento
66 42h Sostenuto
67 43h Soft Pedal
68 44h Legato Footswitch
69 45h Hold 2
70 46h Sound Controller 1 (default: Sound Variation)
71 47h Sound Controller 2 (default: Timbre/Harmonic Content)
72 48h Sound Controller 3 (default: Release Time)
73 49h Sound Controller 4 (default: Attack Time)
74 4Ah Sound Controller 5 (default: Brightness)
75-79 4B-4Fh Sound Controller 6-10 (no defaults)
80-83 50-53h General Purpose Controllers (Nos. 5-8)
84 54h Portamento Control
85-90 55-5Ah Undefined
91 5Bh Effects 1 Depth (previously External Effects Depth)
92 5Ch Effects 2 Depth (previously Tremolo Depth)
93 5Dh Effects 3 Depth (previously Chorus Depth)
94 5Eh Effects 4 Depth (previously Detune Depth)
95 5Fh Effects 5 Depth (previously Phaser Depth)
96 60h Data Increment
97 61h Data Decrement
98 62h Non-Registered Parameter Number LSB
99 63h Non-Registered Parameter Number LSB
100 64h Registered Parameter Number LSB
101 65h Registered Parameter Number MSB
102-120 66-78h Undefined
Channel Mode Messages
121 79h Reset All Controllers
122 7Ah Local Control
123 7Bh All Notes Off
124 7Ch Omni Off
125 7Dh Omni On
126 7Eh Mono On (Poly Off)
127 7Fh Poly On (Mono Off)

happy controlling

msg

_________________
THE MUSIC IS DOWN IN HERE
____________________________________________________

Good judgment comes from experience, and a lot of that comes from bad judgment.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Mar 23, 2007 1:06 pm 
Offline
Professor Emeritus of BovineCompostology
User avatar

Joined: Mon Aug 23, 2004 9:46 pm
Posts: 418
Location: Great Falls, MI
Machine type: AW16G
Another swell post wise one. Sooo if'n I wanted my sequenceing software to raise volume on my POD guitar gizmo from 100 to 120 over a 4 beat time frame, I enter x number of control changes spaced y time apart using cc #7 on channel 2 (which is my POD Rx #). I think I'm starting to get this stuff. I appreciate your time and effort.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC + 1 hour [ DST ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group