The DijonStock Digital Home Recording Support Forum

*** USER REGISTRATION DISABLED! FOR ACCESS TO THE BOARD, MAIL TO registration AT dijonstock DOT com. THANK YOU ***
It is currently Tue Oct 23, 2018 7:02 am

All times are UTC + 1 hour [ DST ]




Post new topic Reply to topic  [ 8 posts ] 
Author Message
PostPosted: Thu Jun 05, 2014 3:02 am 
Offline
Dude

Joined: Tue May 27, 2014 1:44 pm
Posts: 16
Favourite food: Pizza
Machine type: AW4416
Hello everyone! Recently I have the Yamaha AW4416 with which I am fine, I do only one thing is clear. When I record all the tracks, how do I set up the various effects in the channels? Wishing I can put them in all channels or only 7 or 8? Sorry for the English! =)


Top
 Profile  
 
PostPosted: Thu Jun 05, 2014 2:07 pm 
Offline
Greenhorn
User avatar

Joined: Sun Jan 22, 2012 12:21 am
Posts: 158
Location: central maine, usa
Favourite food: pizza
Machine type: AW4416
hello cesco,
the 2 internal effects engines are assigned to aux 7 and 8 ...
after recording tracks 1 to 16 you may add efx (you can also add them to the original recorded tracks but the industry standard is to record tracks "dry" ... )
during playback of recorded tracks, press aux 7 or 8 to open the efx and use the corresponding sliders to add effects to a chosen track (1 track or all tracks....)
hope this helps with your problem
mark


Top
 Profile  
 
PostPosted: Fri Jun 06, 2014 7:06 pm 
Offline
Dude

Joined: Tue May 27, 2014 1:44 pm
Posts: 16
Favourite food: Pizza
Machine type: AW4416
It in fact I can use them, but only on one channel and eff 1 eff2 on another channel, but not a single effect across multiple channels, am I wrong or is the AW4416?


Top
 Profile  
 
PostPosted: Sat Jun 07, 2014 3:31 am 
Offline
Marker Magician
User avatar

Joined: Tue Aug 01, 2006 4:20 pm
Posts: 3486
Machine type: AW2400
There are two ways to use the EFF

1. you can use them as you say. That is called "inserting" the EFF into the signal chain (of one channel). That is what you have set up. Maybe it was that way when you got the machine

2. The other way is to Not insert them to any one channel. When an EFF is NOT inserted to one channel the signals from ALL the channels are routed (sent) through the EFF. You can decide how much of each channel gets sent. This is done (I take from hudroguy's post) through AUX 7 & 8 on the 4416. If this is the way you want to have it, then you will have to break the Insert connection and learn how to find the proper control layer in which the faders are assigned to the EFF buses (AUX 7&8).

They are called buses (in English) because a (passenger) bus carries and delivers many people and an EFF bus carries and delivers multiple signals.

If you have trouble breaking the Insert, just ask and someone will look at the manual and give some instruction.

What language(S) do you speaK?

_________________
Byron


Top
 Profile  
 
PostPosted: Sun Jun 08, 2014 3:51 am 
Offline
Dude

Joined: Tue May 27, 2014 1:44 pm
Posts: 16
Favourite food: Pizza
Machine type: AW4416
Thank you, I have not yet very clear, but the thing I'm working on along with the manual, but I was not very clear, however, I speak Italian.


Top
 Profile  
 
PostPosted: Sun Jun 08, 2014 9:29 am 
Offline
Marker Magician
User avatar

Joined: Tue Aug 01, 2006 4:20 pm
Posts: 3486
Machine type: AW2400
OK. I am not sure we have any Italian speaking regulars here. I will try to look at the 4416 manual and find the screen and sequence you will need to follow instruct the EFF to be assigned to send/return mode.

It sounds as if you have the EFF linked to a specific track. You need to break that and then the EFF can be utilized by all the channels on the Send/Return bus.

Do you have an Italian language manual, or are you struggling along with an English Manual?

_________________
Byron


Top
 Profile  
 
PostPosted: Sun Jun 08, 2014 2:01 pm 
Offline
Robbie The Botkiller
User avatar

Joined: Sat Jun 19, 2004 12:46 pm
Posts: 5120
Location: Netherlands
Favourite food: Ria's cheesecake
Machine type: AW16G
I absolutely LOVE Paolo Conte. Especially the song about the rain coat. 8)

_________________

Don't judge the coffee by its cup.
The proof of the cheese is in the eating


Top
 Profile  
 
PostPosted: Sun Jun 08, 2014 3:15 pm 
Offline
Greenhorn
User avatar

Joined: Sun Jan 22, 2012 12:21 am
Posts: 158
Location: central maine, usa
Favourite food: pizza
Machine type: AW4416
Byron wrote:
OK. I am not sure we have any Italian speaking regulars here. I will try to look at the 4416 manual and find the screen and sequence you will need to follow instruct the EFF to be assigned to send/return mode.

It sounds as if you have the EFF linked to a specific track. You need to break that and then the EFF can be utilized by all the channels on the Send/Return bus.

Do you have an Italian language manual, or are you struggling along with an English Manual?



hello cesco,
check page 166 of manual, it describes how to use effects ...
1- ... press setup button
2- ... press patch IN
3- ... effect patch box should be set ... eff 1 = aux 7 ... eff2 = aux 8
when the settings are as listed, the sliders for aux 7 (or aux 8 ) will add efx to any input channel 1 - 24 or any recorder track 1 -16 ...
i hope this helps with your understanding

mark

Non parlo bene l'italiano ....


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC + 1 hour [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group