The DijonStock Digital Home Recording Support Forum

*** USER REGISTRATION DISABLED! FOR ACCESS TO THE BOARD, MAIL TO registration AT dijonstock DOT com. THANK YOU ***
It is currently Sat May 26, 2018 10:08 am

All times are UTC + 1 hour [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Auto punch
PostPosted: Mon Apr 11, 2005 5:49 pm 
Offline
City Slicker
User avatar

Joined: Sat Apr 02, 2005 5:53 am
Posts: 36
When I am recording tracks I use Auto punch frequently, especially when I just wanna replace a line or 2 here and there.
My problem after I am finished recording my punch-in, I have to hit the Auto punch button repeatedly to get the G out of Auto-punch mode.
This is very annoying recording can be very tedious sometimes and this really gives me a headache.
Any help? :bonedemon


Top
 Profile  
 
 Post subject:
PostPosted: Mon Apr 11, 2005 7:24 pm 
Offline
Robbie The Botkiller
User avatar

Joined: Sat Jun 19, 2004 12:46 pm
Posts: 5083
Location: Netherlands
Favourite food: Ria's cheesecake
Machine type: AW16G
Do you also have to push it repeatedly to get it INTO auto punch in mode? If not, it must be a software error (in fact: a hardware state error). You can correct that by unplugging the G from the power socket for a longer period of time. Otherwise the button contact is faulty. I know there are ways to clean it but I can't give any advice here.

_________________

Don't judge the coffee by its cup.
The proof of the cheese is in the eating


Top
 Profile  
 
 Post subject:
PostPosted: Mon Apr 11, 2005 7:40 pm 
Offline
Has Been To Cheeseland
User avatar

Joined: Tue Jun 22, 2004 10:09 pm
Posts: 5981
Location: Just west of DEE-troit
Machine type: AW16G
Don't know if this is anywhere close to the mark, but it takes a few seconds after you finish an auto punch for the G to digest the punch-in and automatically go back to the pre-roll point. If you press any buttons during this period nothing will happen. Look at the clock and wait until it gets back to the pre-roll point before you hit the button.

Am I barking up the wrong tree here?


Sorry :oops: Couldn't resist. :D


Top
 Profile  
 
 Post subject:
PostPosted: Mon Apr 11, 2005 7:44 pm 
Offline
Robbie The Botkiller
User avatar

Joined: Sat Jun 19, 2004 12:46 pm
Posts: 5083
Location: Netherlands
Favourite food: Ria's cheesecake
Machine type: AW16G
JM wrote:
... it takes a few seconds after you finish an auto punch for the G to digest the punch-in and automatically go back to the pre-roll point. If you press any buttons during this period nothing will happen.


Good one!

_________________

Don't judge the coffee by its cup.
The proof of the cheese is in the eating


Top
 Profile  
 
 Post subject: Auto punch
PostPosted: Mon Apr 11, 2005 7:45 pm 
Offline
City Slicker
User avatar

Joined: Sat Apr 02, 2005 5:53 am
Posts: 36
I don't think it is the button because when I turn it on it lights up immediately the first time. The problem is getting it to shut off afterwards.
It does eventually turn off after many presses.
Do you think the "post-roll" time may be the issue?
I will try setting that to min. I just found it in my manual.
I have had the machine unplugged for days sometimes and minutes others.
I don't think that is the answer either.
I was just wondering if anyone had run into this befoe?
Thanks


Top
 Profile  
 
 Post subject: Thanks
PostPosted: Tue Apr 12, 2005 4:07 pm 
Offline
City Slicker
User avatar

Joined: Sat Apr 02, 2005 5:53 am
Posts: 36
I think you're right I was just not letting the machine catch up with me.


Top
 Profile  
 
 Post subject:
PostPosted: Tue Apr 12, 2005 5:12 pm 
Offline
Has Been To Cheeseland
User avatar

Joined: Tue Jun 22, 2004 10:09 pm
Posts: 5981
Location: Just west of DEE-troit
Machine type: AW16G
Glad to hear all you need is a few second's patience and not a warranty claim. That one got me a few times before I figured it out.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC + 1 hour [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group