The DijonStock Digital Home Recording Support Forum

hi guys wonder if any of you had experienced the master fader losing volume during live or recorded play back, I did try an give it a blast a while back with compressed air but I think thats made things worse. its annoying the hell out of me now. thanks

Hi Delbert, I have`nt come across this personally, sounds like maybe something is left over from a previous scene, but I`m sure one of the more experienced members can help.
Hope you get sorted soon.

T.

_________________
https://tmacmusic12.wixsite.com/tmac1

https://tmacmusic12.wixsite.com/tmac

http://www.soundcloud.com/t-mac-12

http://www.youtube.com/channel/UCmCjAzN ... ture=watch

https://www.reverbnation.com/tmac

I would agree that it sounds like a scene to me. Have you cleared all your previous scenes by doing an initial recall or whatever it's called?

_________________
GSMUSIC: Hey RZ, Im not no upper class american, the gear I own is what I have special to me. My car sucks, my house sucks, my nieghborhood sucks. Does yours RZ? Does it?

rz-land

hi an thanks for replies, yep done the recall initial data from scene menu but no joy there

There was at least one other report of a fader problem posted at http://forum.dijonstock.com/viewtopic.php?f=10&t=14254&p=153796&hilit=digikey#p153796

The poster was able to buy a replacement part. If you're into parts replacement, that might fix your problem. The other possibility is to swap the track 15/16 fader for the master.

The above link indicates the poster found the spare part number in a list from Yamaha and could buy it from either Yamaha or Mouser Electronics (cheaper there). Robbie indicated he would post the spare parts list in the Docs section of this site. However, I don't see it. Still got it Robbie?

Good luck,

_________________
Ralph (aka The Head Hog)
"What's Time to a Hog?"
Hog Time Music Website - My Songs on Bandcamp -

hi hogtime thanks for the link, think it could need a new part, how do i go about swapping the master fader over to 15/16

I think I must have that list somewhere... but where? I'll look it up.

_________________

---

Don't judge the coffee by its cup.
The proof of the cheese is in the eating

If I remember correctly, hitting initial data will reset the fader... until it hits a scene! Try navigating to the scene menu and delete all the scenes...

Acoustic

_________________
Could you show that to me again... slower?

This would require opening the unit and actually removing the two faders and putting the 15/16 one in the master position. Only helps if you're comfortable taking apart the unit and doing this. Would require a small soldering iron. If you're not handy with this type of repair, then my suggestion doesn't help.

However, if you have some sort of electronic repair friend or shop nearby, they could do it for you. This would tell you if the master fader is bad, without buying a new part. If it is bad, then you could buy a new part and put it in the 15/16 spot.

_________________
Ralph (aka The Head Hog)
"What's Time to a Hog?"
Hog Time Music Website - My Songs on Bandcamp -

I'll put the parts list here for now...

EDIT: file deleted. It's now on the docs page.

_________________

---

Don't judge the coffee by its cup.
The proof of the cheese is in the eating

Thanks, Robbie! Turns out I had it on my computer, but couldn't find it.

Here's where one can buy an AW16G fader potentiometer for a whopping $3.07 (plus s&h).
http://www.mouser.com/ProductDetail/ALPS/RS45111A900F/?qs=%2fha2pyFadujEv9te7VFjB%2fAK4UjI5GTDrSecpeY1Up8%3d

_________________
Ralph (aka The Head Hog)
"What's Time to a Hog?"
Hog Time Music Website - My Songs on Bandcamp -

It's now on the docs page, so I'll remove the attachment in this topic.

_________________

---

Don't judge the coffee by its cup.
The proof of the cheese is in the eating

thanks for the part ref, guessing you think its shot then. still at a couple of pounds at least the part is cheap. not sure if i have the nuts to open up the box though. have a great new year and thanks again

hi i have gone to scene menu and the only one there is the original data, am i missing something?

If you've never saved a scene then it shouldn't be the problem. If you listened to the demo song for example and then when to load a new song project, the scenes from the demo would still be in place. That's why they have the initial data restore feature. It clears house from the old scenes.

_________________
GSMUSIC: Hey RZ, Im not no upper class american, the gear I own is what I have special to me. My car sucks, my house sucks, my nieghborhood sucks. Does yours RZ? Does it?

rz-land

Scenes can be nasty but they only change during playback when there's a tempo map!

_________________

---

Don't judge the coffee by its cup.
The proof of the cheese is in the eating

sorry for the late reply but problem is i loose volume just playing a cd back. not sure if scenes would effect that.

No, scenes don't affect playing a CD. The only affect playing tracks 1-16. They also don't affect playing a stereo mix already made on the machine (as long as it's on the stereo track).

_________________
Ralph (aka The Head Hog)
"What's Time to a Hog?"
Hog Time Music Website - My Songs on Bandcamp -

thanks hogtime seems its definitely the fader. gonna have to grow some nuts and just open her up.

_________________
GSMUSIC: Hey RZ, Im not no upper class american, the gear I own is what I have special to me. My car sucks, my house sucks, my nieghborhood sucks. Does yours RZ? Does it?

rz-land