The DijonStock Digital Home Recording Support Forum

*** USER REGISTRATION DISABLED! FOR ACCESS TO THE BOARD, MAIL TO registration AT dijonstock DOT com. THANK YOU ***
It is currently Tue Mar 19, 2024 5:11 am

All times are UTC + 1 hour [ DST ]




Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Tue Jun 04, 2019 3:45 am 
Offline
Dude

Joined: Fri May 31, 2019 1:06 am
Posts: 16
Favourite food: pizza
Machine type: AW16G
I have been reading both the AW16G manuals (full and simplified) and reading user group posts to attempt to determine why the 'G" I have only writes the very first stereo track I ever recorded on it. Here is a step-by-step listing of everything that I have done to create a four-track song, do a mixdown on it, and burn "something" to the CD. Please know that this long listing was the only way that I could accurately detail the entire process. If anyone can find the flaw in the list, I would be "eternally grateful" (or something to that effect).


Steps taken to record/mix/burn:
(A) RECORD:
1) [SONG], [NEW]
2) Record on four tracks, numbered 1-4
3) [SONG], [SAVE]

(B) Pre-mix:
1) Go through pan, volume levels, and EQ basics.
2) Verify total dB is <=0.

(C) Mixdown:
1) [MONITOR] – [ST. TRACK] (“St. TRACK” is set to OFF)
2) move cursor to desired track # (this case=2), press [ENTER]
3) [RECORD] – [MIXDOWN], select [REC] (out of “SAFE”), press [ENTER]
4) [REC]&[PLAY], wait until end of recorded tracks, [STOP] button
5) move cursor to [SAFE], press [ENTER]. ‘G’ prompts “Clear current REC setting”?
6) move cursor to [OK], press [ENTER].
7) (verify the mix):
8) [MONITOR] – [ST. TRACK], set “ST. TRACK” to ON.
9) reset playback counter to 0, press [PLAY]. Song plays as expected.
10) [SONG]-[LIST], go to [SAVE]. Press [ENTER].
11) ‘G’ prompts “Save current song?” move cursor to [OK], press [ENTER].
12) [MONITOR] – [ST. TRACK], set “ST. TRACK” to OFF.

(D) CD burn:
1) [CD]-[CD WRITE]-[TRACK AT ONCE], press [ENTER]
2) At this point, song “by name” does not appear in the track list. I can tell by comparing the filesizes listed to the known filesize of the saved track. All I see is a list of names reading ‘EXIST’ with numbers associated.
3) Here is apparently where only the first song I ever recorded on the ‘G’ can be burned.
4) If I run it with one of the [EXIST] tracks, it writes to the CD, then prompts to finalize the media. [CANCEL], [ENTER].
5) [CD]-[CD PLAY] brings up a list. The durations prove that the first stereo track was in fact the one written.
6) Once again, I have written the first stereo track instead of the second track as intended.

I cannot tell what step I either missed or botched.


Top
 Profile  
 
PostPosted: Tue Jun 04, 2019 5:20 pm 
Offline
Spaminator Extraordinaire
User avatar

Joined: Tue Jun 22, 2004 10:58 pm
Posts: 8713
Favourite food: sushi
Machine type: AW2400
Howdy. It's been ages, but I know you have to scroll to get to the name of the file you want to write. The default will show up on the screen, but by using the jog wheel. I think, will get you to the new file you want to burn.

_________________
GSMUSIC: Hey RZ, Im not no upper class american, the gear I own is what I have special to me. My car sucks, my house sucks, my nieghborhood sucks. Does yours RZ? Does it?

rz-land


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC + 1 hour [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group