The DijonStock Digital Home Recording Support Forum

*** USER REGISTRATION DISABLED! FOR ACCESS TO THE BOARD, MAIL TO registration AT dijonstock DOT com. THANK YOU ***
It is currently Fri Dec 15, 2017 10:23 am

All times are UTC + 1 hour [ DST ]




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Is this normal?
PostPosted: Sun Oct 25, 2015 3:55 pm 
Offline
Dude

Joined: Thu Oct 08, 2015 7:21 pm
Posts: 11
Machine type: AW16G
Hi guys.
Had a good all day session yesterday with the AW16G. Managed to get hold of some multi track stems off the web, amazing what's out there.
Got some Nine Inch Nails stuff which one I had to get down to 16 tracks and convert to mono as it was 17 stereo tracks.. Could upload it somewhere if anyone wants to load it up, it's about 350MB

Anyway, not sure if this is normal or not.
If I have a few tracks turned off and then solo stuff when I release the solo the tracks which were turned off suddenly turn on? Seems a bit odd almost a bug maybe? Or is this normal and I've overlooked something?

Discovered the scenes now which are really important I found for recalling your mixer settings, a bit hard work but that's the way it is. Would be great to be able to do crossfades between scenes but I know it doesn't work like that.
Cheers


Top
 Profile  
 
 Post subject: Re: Is this normal?
PostPosted: Sun Oct 25, 2015 9:41 pm 
Offline
Wrangler
User avatar

Joined: Tue Apr 04, 2006 2:51 pm
Posts: 877
Favourite food: food
Machine type: AW16G
Gonzini wrote:
Hi guys.


Anyway, not sure if this is normal or not.
If I have a few tracks turned off and then solo stuff when I release the solo the tracks which were turned off suddenly turn on? Seems a bit odd almost a bug maybe? Or is this normal and I've overlooked something?



Yes, that's what mine does too. Most irritating.

C.


Top
 Profile  
 
 Post subject: Re: Is this normal?
PostPosted: Sun Oct 25, 2015 10:09 pm 
Offline
Dude

Joined: Thu Oct 08, 2015 7:21 pm
Posts: 11
Machine type: AW16G
Hi
Ok thanks, I've updated the firmware in mine so don't know if it did it with V1.04 which is what it was on when i got it.
Just have to work around it then....


Top
 Profile  
 
 Post subject: Re: Is this normal?
PostPosted: Tue Oct 27, 2015 2:25 am 
Offline
Robbie The Botkiller
User avatar

Joined: Sat Jun 19, 2004 12:46 pm
Posts: 5022
Location: Netherlands
Favourite food: Ria's cheesecake
Machine type: AW16G
Depends on the state at the moment of switching the machine off.

If tracks are disconnected during the latest shutdown of the machine (instead of simply pushing the power button) the tracks will be disconnected the next time the machine is turned on (even though the tracks are connected later).

_________________

Don't judge the coffee by its cup.
The proof of the cheese is in the eating


Top
 Profile  
 
 Post subject: Re: Is this normal?
PostPosted: Tue Oct 27, 2015 2:22 pm 
Offline
Dude

Joined: Thu Oct 08, 2015 7:21 pm
Posts: 11
Machine type: AW16G
Hi Robbie
Not sure if im fully there with that one.
Is there a way to stop it happening?
Basically all I've done is imported 16 tracks, so not recorded anything.
I'll have a another look at it later if i get a chance, bit busy at the moment.
Just seems odd that clearing the solo on a track will turn on all other tracks that are turned off when really they shouldn't be connected at all with the solo function in my mind.
Cheers


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC + 1 hour [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group