The DijonStock Digital Home Recording Support Forum

Hi everybody,

Just dusted off the AW16G I had lying around studio for years. Wasn't used much so far, so I wanted to make use of it for one live performance.
However, by starting to use it, I also remembered what I did find the most annoying about it, and cannot find anything about it in the manual.

Setting any large scale values, especialy a delay time, is a pure pain and rotary encoder destruction. As there are no INC/DEC buttons, nor SHIFT, there seems no way to scroll through values rapidly. Setting from 000.0ms to, say, 727.3ms will take a over 7273 ticks, and that would be about 300 full turns.

I believe there should be some way of setting values rapidly? Like in rolands it is by pressing down the knob (and this way adjusting goes into +/-100 instead of +/-1) I couldn't find anything about it in manual, nor holding any button while turning helps.

HELP! Otherwise I will have to modify the unit's hardware to make an improvised shuttle knob

Hi D.,

Alas, no such thing.

What you can do is change the parameters and save them in a scene. That way you can always recall the fx with the changed parameters.

Welcome to the forum, make yourself at home.

_________________

---

Don't judge the coffee by its cup.
The proof of the cheese is in the eating

You can also save effects settings in the library.

I agree that the setting of the parameters is a pain.

_________________
Byron